killer rc remote kill switch

[hndaman1]

I bought this cool little item it is very awesome. you plug it into your 3rd channel and you can kill you car just buy shutting off you radio.. very cool.. everyone one that has a 5thscale no matter which model you own should have one of these.. I have the V-2/s cause I have a spektrum radio..


http://www.killerrc.com/products/pro...killswitch.php

[beason]

i dont see any prices, how much did it cost you. the ones ive seen in the past were pretty expensive.

[robmob]

Here are the prices.

http://www.killerrc.com/store/store.php

[hndaman1]

I think mine was 60 something dollars

[Timmahh]

OMG, WE AGREE! lol see it can happen Matt.


Kents Remote Kill switches pretty much Rock.

I have only HAD to use mine ONCE so far to shut down from a sticking throtle. but i use it almost every time i run for tuning. get up to the rpms i want to check, and Flip the switch, motor shuts down and i get a TRUE plug reading for that RPM. can really allow you to tweek your needles very well if your looking for the utmost power.

[hndaman1]

the only thing is, I have the V#2 and I cannot kill it with a 3rd channel on on speky, that is the only thing I do not like about it..

[Timmahh]

you can thank the designers at spectrum for that.

[hndaman1]

I seen pitdawgs from HBf he has tons of stuff hooked up on his rear tail lamps/headlamps, buzzer, and led.. seems like alot running off that little battery..

[pb2themax]

Originally Posted by hndaman1

the only thing is, I have the V#2 and I cannot kill it with a 3rd channel on on speky, that is the only thing I do not like about it..

You should have bought a v1 if you want to kill the engine with your 3rd channel.

The v2 and v2-S are for 2 channel radios, or radios that have the 3rd channel already used up by some other accessory. If you dont have any other plans for your 3rd channel then you should get a v1 and plug it into your 3rd channel, then you can kill it via your Aux switch on the transmitter.

[hndaman1]

Originally Posted by pb2themax

You should have bought a v1 if you want to kill the engine with your 3rd channel.

The v2 and v2-S are for 2 channel radios, or radios that have the 3rd channel already used up by some other accessory. If you dont have any other plans for your 3rd channel then you should get a v1 and plug it into your 3rd channel, then you can kill it via your Aux switch on the transmitter.

so I need the v1-s?

[pb2themax]

There is only v1,v2, and v2S. If you want to kill the engine with your aux channel then you need a v1.
Read: http://www.killerrc.com/faq/faq.php

[hndaman1]

does that work with spektrum?

[pb2themax]

Yes. Just read through the link I posted in my previous post.

[pb2themax]

Thanks.

BTW, We have a nitro kill switch coming soon. In fact I just did some testing with it a few minutes ago. It works awesome. We just have to work on the cosmetics and packaging, etc.